Paradise Robotics Forum

Robotic Lawnmowers => Lawnbott => Topic started by: whitey on April 19, 2013, 01:37:25 PM

Title: robot stopped
Post by: whitey on April 19, 2013, 01:37:25 PM

while mowing, robot stopped with a e-03 blade reading. tried to start outside then in house; goes through motions, but blade wont start.... huh? :(

Title: Re: robot stopped
Post by: cullen on April 30, 2013, 05:13:08 PM

At a guess, you've got a broken blade motor.

Title: Re: robot stopped
Post by: toolbelt on May 01, 2013, 02:10:20 PM

Take off the body and plastic hood that covers the battery/motors and check that the wires to the motor haven't jiggle loose.  Also check for corrosion in case the connectors got wet.  Could be as simple as that.

After you reinstall the plastic cover use some aluminum duct tape to cover the junction where it meets the metal chassis.  That way fine grass dust doesn't get down around the motors or around the mother board.